UHF 6dBi RFID Antenna

UHF 6dBi RFID Antenna

Model: APRIA9006C

Frequency Range: 902-928MHz

Polarization: Circular 

Gain: 6dBi

 

 

Product Descriptions

The APRIA9006C UHF 6dBi RFID Antenna is a mid range, circularly polarized, flat panel antenna.It provides a 90 degrees beamwidth. The design of circular polarization makes the antenna could read the horizontal tag or vertical tag. The antenna is low profile with size of 260x260x45mm, comes with an pigtail and includes pole mount bracket.

The antenna is suitable for a range of indoor / outdoor RFID deployments, including industrial applications.It’s wide using application such as warehousing, logistic, production, yard. It’s used on  assets tracking, warehouse management, intelligent traffic management, vehicle tracking, production line management, intelligent weight measurement etc.

This model is FCC UHF RFID frequencies for 902-928MHz, there is also another model of ETSI UHF RFID frequencies for 865-868MHz.

Product Specifications - UHF 6dBi RFID Antenna

Electrical Specifications

Frequency

902-928MHz

Gain

6dBi

Beam width

Hor:90°  Ver:90°

Polarization

Circular

VSWR

≤1.4

F/B Ratio

≥20

Impedance

50Ω

Maximum power

50W

Lightning protection

DC Ground

Connector

SMA-Female

Mechanical Specifications

Dimension

130*130*18mm

Net weight

0.2kg

Packing size

17*17*3.5cm

Gross weight

0.25kg

Radome material

ABS

Radome colour

White

Operating temperature

-40-70℃

PRODUCT SUPPORT

FAQ - 902–928MHz UHF RFID Antenna

Not necessarily. A higher-gain UHF RFID antenna generally concentrates more RF energy in certain directions, which may help extend the reading distance in a suitably designed system. However, gain alone does not determine actual performance. Beamwidth, antenna orientation, reader power, tag characteristics, cable loss, and environmental conditions all influence the effective reading range. The best antenna should be selected according to the required reading area rather than gain alone.

The choice between linear and circular polarization depends mainly on how RFID tags are positioned during identification. A linearly polarized antenna works best when its polarization direction is aligned with the tag antenna, making it suitable for applications where tag orientation is controlled. A circularly polarized antenna offers greater flexibility when tags may be presented at different angles. However, neither polarization guarantees successful reading in every orientation. The application, tag placement, and required reading area should all be considered when selecting an antenna.

A compact UHF RFID panel antenna can be integrated into equipment and installations where space is limited. Its smaller dimensions make it suitable for applications such as retail identification points, access control equipment, and warehouse checkpoints. When selecting an antenna, consider the available installation space, required reading area, tag orientation, and compatibility with the RFID reader.

RFID antennas can be installed at designated reading points in retail stores to identify tagged products and support inventory management. When connected to an RFID reader and inventory software, the system can collect product information during stock checks, item transfers, and other retail operations. This helps improve stock visibility and reduce the need for manual item-by-item scanning.

Yes. Circularly polarized RFID antennas are less dependent on tag alignment than linear antennas, making them useful when tagged items may be positioned at different angles. This can benefit retail inventory, warehouse management, and access control applications. However, circular polarization does not guarantee successful reading at every angle, as performance also depends on tag characteristics, distance, and the surrounding environment.

A 6dBi UHF RFID antenna can be used in door access control systems that rely on UHF RFID tags for identification. It can be integrated with an RFID reader and access control software to identify authorized tags near designated entry points. The antenna position and reader settings should be configured to provide the intended reading area and help prevent unwanted reads from nearby locations.

Please feel free to contact us by info@airpluxtec.com for more detailed info if you’re interested in this Antenna, or please check here for our more RFID Antenna products.

Contact

We are always ready to serve you.

Please feel free to contact us
for any antenna inquiry or requirement.

Leave us a message in the form below and
we will get back to you within 24 hours.