UHF 10dBi RFID Antenna

UHF 10dBi RFID Antenna
Model: APRIA90010C
Frequency Range: 902-928MHz
Polarization: Circular
Gain: 10dBi
Product Descriptions
The APRIA90010C 10dBi UHF RFID Antenna is a long range, circularly polarized, flat panel antenna.It provides a 70 degrees beamwidth. The design of circular polarization makes the antenna could read the horizontal tag or vertical tag. The antenna size is 420x240x30mm, comes with an integral N-Female connector and includes pole mount bracket.
The rugged antenna radome is suitable for a range of indoor / outdoor RFID deployments and UHF RFID Antenna Solution, including industrial applications.It’s wide using application such as warehousing, logistic, production, yard. It’s used on assets tracking, warehouse management, intelligent traffic management, vehicle tracking, production line management, intelligent weight measurement etc.
This model is FCC UHF RFID frequencies for 902-928MHz, there is also another model of ETSI UHF RFID frequencies for 865-868MHz.
Product Specifications - 10dBi UHF RFID Antenna
Electrical Specifications | |
Frequency | 902-928MHz |
Gain | 10dBi |
Beam width | Hor:70° Ver:70° |
Polarization | Circular |
VSWR | ≤1.4 |
F/B Ratio | ≥20 |
Impedance | 50Ω |
Maximum power | 50W |
Lightning protection | DC Ground |
Connector | N-Female |
Mechanical Specifications | |
Dimension | 420*240*30mm |
Net weight | 1.15kg |
Packing size | 45*25*5.5cm |
Gross weight | 1.95kg |
Radome material | ABS |
Radome colour | White |
Pole Diameter | Φ30-50mm |
Rated wind velocity | 60m/s |
Operating temperature | -40-70℃ |
PRODUCT SUPPORT
FAQ - 902–928MHz UHF RFID Antenna
Not necessarily. A higher-gain UHF RFID antenna generally concentrates more RF energy in certain directions, which may help extend the reading distance in a suitably designed system. However, gain alone does not determine actual performance. Beamwidth, antenna orientation, reader power, tag characteristics, cable loss, and environmental conditions all influence the effective reading range. The best antenna should be selected according to the required reading area rather than gain alone.
The choice between linear and circular polarization depends mainly on how RFID tags are positioned during identification. A linearly polarized antenna works best when its polarization direction is aligned with the tag antenna, making it suitable for applications where tag orientation is controlled. A circularly polarized antenna offers greater flexibility when tags may be presented at different angles. However, neither polarization guarantees successful reading in every orientation. The application, tag placement, and required reading area should all be considered when selecting an antenna.
UHF RFID antennas can be installed near vehicle entrances, exits, or designated checkpoints to identify vehicles equipped with RFID tags. When a vehicle enters the reading area, the antenna communicates with the tag through an RFID reader, allowing the system to record vehicle identification data automatically. This can support parking management, fleet tracking, and access control. Antenna placement should account for vehicle speed, tag location, and the required reading area.
Circular polarization is useful in outdoor RFID applications because tagged assets may not always maintain a consistent orientation relative to the antenna. It helps reduce the dependence on tag alignment compared with linear polarization, making it suitable for vehicle tracking, logistics yards, and outdoor asset identification. However, reading performance still depends on tag placement, distance, surrounding materials, and system configuration.
Outdoor pole-mounted RFID antennas should be installed at a suitable height and orientation to cover the intended reading area. The mounting pole must provide adequate mechanical support, and the bracket should be compatible with the pole diameter and antenna weight. Wind exposure, cable routing, grounding, and protection of outdoor connections should also be considered to support reliable long-term operation.
RFID antennas can be positioned at yard entrances, storage zones, and transfer points to identify tagged containers, equipment, and other assets. By connecting RFID readers to asset management or logistics software, businesses can record asset movements and improve visibility across different operational areas. The reading layout should be designed to distinguish intended checkpoints and minimize unwanted reads from nearby tagged objects.
Please feel free to contact us by info@airpluxtec.com for more detailed info if you’re interested in this Antenna, or please check here for our more UHF RFID Antenna Solution.
Contact
We are always ready to serve you.
Please feel free to contact us
for any antenna inquiry or requirement.
Leave us a message in the form below and
we will get back to you within 24 hours.