6dBi UHF Ultra Slim RFID Antenna

An 865–868 MHz antenna is designed for UHF RFID and low-power wireless applications operating in the European ETSI SRD band. Typical uses include UHF RFID readers (EPC Gen2 / ISO 18000-6C), asset tracking, warehouse management, access control, smart retail, race timing, and IoT/M2M systems deployed in Europe and other regions following ETSI regulations.
Airplux offers this band across multiple product families: the ETSI 865–868 MHz RFID antenna line (3–15 dBi PCB, panel and mat antennas), near-field RFID antennas, narrow-beam antennas, and ETSI UHF integrated reader antennas. For example, the 3 dBi circular-polarized PCB antenna APRIA8003CM-137 suits compact desktop readers, while high-gain panel models support long-range portal and gate applications.

ETSI 865–868 MHz antennas are tuned for the European UHF RFID band (ETSI EN 302 208), while FCC 902–928 MHz antennas cover the North American band (FCC Part 15). The two bands do not overlap, so an antenna optimized for one will have degraded VSWR, gain and read range on the other. Choose the version that matches your reader’s regional profile.
Airplux manufactures both variants with matching mechanical designs — e.g., the ETSI 865–868 MHz panel series and the FCC 902–928 MHz series are available at the same gain levels (3–15 dBi). For global or multi-region deployments that need one SKU for both markets, the wideband UHF 860–960 MHz antenna line covers both bands in a single antenna, ideal for asset tracking and smart retail projects shipped worldwide.

It is not recommended. A 915 MHz antenna is resonant around 902–928 MHz; at 865–868 MHz its impedance match detunes, VSWR rises, and radiated efficiency drops — typically reducing RFID read range by 20–40% or more, and in some regions pushing the system out of regulatory compliance. Always match the antenna to the device’s operating band.
If your hardware must serve both Europe (865–868 MHz) and North America (902–928 MHz), use a genuinely wideband model instead of compromising with a single-band antenna. Airplux’s UHF 860–960 MHz RFID antenna series maintains consistent gain and low VSWR across the entire 860–960 MHz range, so one antenna design can be certified and deployed in both regions.

An ultra-slim UHF RFID antenna is used in retail systems where RFID reading needs to be integrated into display fixtures, shelves, or countertops without taking up much space. The Airplux APRIA8006CX measures 560 × 110 × 1 mm and provides 6 dBi gain with circular polarization. Its thin profile makes it suitable for evaluating applications such as smart shelves, display cabinets, and retail inventory management. Actual reading performance depends on tag placement, antenna positioning, reader settings, and the materials surrounding the installation.

Yes. A 1 mm thick PCB antenna can be considered for concealed installation beneath suitable shelves, display counters, or cabinet surfaces. The Airplux APRIA8006CX has a slim 560 × 110 × 1 mm structure, allowing it to fit into some space-constrained retail fixtures. Before installation, check the material and thickness of the surface between the antenna and RFID tags. Metal surfaces can significantly affect antenna performance, so the final configuration should be tested with the actual shelf, products, and tags.

A 50° horizontal beamwidth and 110° vertical beamwidth indicate that the antenna has a narrower radiation pattern horizontally and a wider pattern vertically. The Airplux APRIA8006CX uses this directional pattern to concentrate coverage across one axis while providing broader coverage along the other. This can be useful when planning a reading zone for elongated display fixtures or shelves. The beamwidth describes the antenna’s radiation pattern, not a guaranteed reading area; actual coverage depends on installation distance, tag position, and RF reflections.