617-4000MHz 5G DAS Antenna Portfolio
617-4000MHz 5G DAS Antenna
——Low PIM Indoor Antennas for DAS, Small Cell, and In-Building Wireless Networks
The Airplux 617–4000MHz DAS antenna lineup supports modern indoor wireless deployments with broad frequency coverage, low PIM performance, and flexible installation options. It’s built for Distributed Antenna Systems (DAS) and small cell networks, and it improves indoor coverage where reliable connectivity really matters.
You can choose from Ultra Slim Omni, Ceiling Omni, and Indoor Panel configurations — each one tuned for different building layouts and deployment goals. Whether you need discreet installation in modern offices, uniform coverage across open public areas, or focused signal distribution along corridors and specific zones, Airplux has an antenna that fits the job.
The series covers a wide range of low-band and mid-band frequencies, which simplifies network design while keeping pace with the changing demands of 4G LTE and 5G in-building wireless networks across commercial, enterprise, healthcare, hospitality, and transportation environments.
What is a 617-4000MHz 5G DAS Antenna?
A 617–4000MHz 5G DAS antenna is a wideband indoor antenna that distributes wireless signals across multiple cellular bands inside a building. You’ll typically find it in Distributed Antenna Systems (DAS) and small cell deployments where indoor coverage needs to be reliable.
Unlike single-band antennas, a wideband DAS antenna handles multiple 4G LTE and 5G frequency ranges through one antenna platform. That means simpler network design and more flexibility for offices, hospitals, airports, hotels, shopping centers, and other large indoor spaces.
If you’re a network designer or system integrator, you’re not just adding more antennas for the sake of it. The real goal is consistent signal coverage throughout the building, solid network efficiency, and room to expand later. Wideband DAS antennas deliver that balance — broad frequency support paired with flexible deployment options.
Why 617-4000MHz Matters for Modern DAS Networks
Modern indoor wireless networks rarely operate on a single frequency band. Today’s DAS and small cell deployments often need to support a combination of low-band and mid-band cellular frequencies to meet different coverage and capacity requirements.
A 617–4000MHz DAS antenna helps simplify this challenge by providing broad frequency coverage within a single antenna platform. Instead of deploying multiple antennas for different frequency ranges, network designers can support a wider range of services while maintaining a cleaner and more flexible installation.
Ultra Slim Omni vs Ceiling Omni vs Panel: Which One Fits Your Deployment?
Although all three antenna types support indoor DAS deployments, they are designed for different installation environments and coverage objectives. Choosing the right antenna depends on factors such as ceiling design, coverage pattern, visual appearance, and installation requirements.
The table below provides a quick overview of where each antenna type performs best.
| Feature | Ultra Slim Omni | Ceiling Omni | Indoor Panel |
|---|---|---|---|
| Coverage Pattern | 360° | 360° | Directional |
| Installation | Flush Ceiling | Standard Ceiling | Wall Mount |
| Visual Impact | Very Low | Medium | Medium |
| Best For | Premium Interiors | Open Indoor Areas | Corridors & Targeted Zones |
| Coverage Style | Uniform Coverage | General Coverage | Focused Coverage |
| Typical Projects | Offices, Hotels | Retail, Public Areas | Hallways, Transit Areas |
Typical Applications for 617–4000MHz DAS Antennas
Reliable indoor wireless coverage is essential in environments where large numbers of users depend on consistent cellular connectivity. 617–4000MHz DAS antennas are commonly deployed in buildings where outdoor signals may be weakened by walls, glass, or complex architectural layouts. Their wideband coverage and flexible antenna options make them suitable for a variety of in-building wireless projects.
Office Buildings
Challenge:
Multiple rooms and floors can create inconsistent indoor signal levels.
Solution:
Wideband DAS antennas help distribute cellular coverage throughout the building.
Shopping Malls
Challenge:
High user density and large open spaces.
Solution:
Omni antennas provide broad indoor coverage across public areas.
transportation hubs
Challenge:
Constant movement and varying traffic volumes.
Solution:
Flexible DAS deployments help maintain reliable connectivity.
Complete 617–4000MHz DAS Antenna Portfolio
To support diverse in-building wireless applications, Airplux offers a complete range of 617–4000MHz DAS antennas, including ultra slim omni, ceiling omni, and panel antenna solutions. Each model is designed to deliver dependable indoor coverage while providing the flexibility required for modern DAS and small cell networks.
617-4000MHz 5G Ultra Slim Omni Antenna
617-4000MHz 5G SISO Ultra Slim Omni Antenna
Model: APTOA614035LP4
Frequency Range: 617-960/1710-2700/3300-4000MHz
Polarization: Horizontal
Gain: 3/5dBi
PIM: -153dbc@2x43dbm
Connector: 4.3-10 Female
Dimensions: Ø190x10mm
617-4000MHz 5G MIMO Ultra Slim Omni Antenna
Model: APMTOA614035LP4
Frequency Range: 617-960/1710-2700/3300-4000MHz
Polarization: 2xHorizontal
Gain: 3/5dBi
PIM: -153dbc@2x43dbm
Connector: 2×4.3-10 Female
Dimensions: Ø280×19mm
617-4000MHz 5G Omni Ceiling Antenna
617-4000MHz 5G SISO Omni Ceiling Antenna
Model: APOCA614024LP4
Frequency Range: 617-960/1710-2700/3300-4000MHz
Polarization: Vertical
Gain: 2/4dBi
PIM: -153dbc@2x43dbm
Connector: 4.3-10 Female
Dimensions: Ø204×125mm
617-4000MHz 5G MIMO Omni Ceiling Antenna
Model: APMOCA614034LP4
Frequency Range: 617-960/1710-2700/3300-4000MHz
Polarization: Linear
Gain: 3/5dBi
PIM: -153dbc@2x43dbm
Connector: 2×4.3-10 Female
Dimensions: Ø215×47mm
617-4000MHz 5G Indoor Panel Antenna
617-4000MHz 5G SISO Indoor Panel Antenna
Model: APIPA614068LP4
Frequency Range: 617-960/1710-2700/3300-4000MHz
Polarization: Vertical
Gain: 6/8dBi
PIM: -153dbc@2x43dbm
Connector: 4.3-10 Female
Dimensions: 180x158x60mm
617-4000MHz 5G MIMO Indoor Panel Antenna
Model: APMIPA614069LP4
Frequency Range: 617-960/1710-2700/3300-4000MHz
Polarization: Horizontal + Vertical
Gain: 6/8.5dBi
PIM: -153dbc@2x43dbm
Connector: 2×4.3-10 Female
Dimensions: 315x195x68mm
Frequently Asked Questions About 617–4000MHz DAS Antennas
A 617–4000MHz DAS antenna distributes cellular signals throughout a building as part of a Distributed Antenna System (DAS) or small cell network. That makes it a practical choice for improving indoor coverage where walls, glass, and building structures weaken outdoor signals. You’ll typically find these antennas in office buildings, hospitals, shopping malls, hotels, airports, and transportation facilities.
Yes. A 617–4000MHz DAS antenna supports a broad range of low-band and mid-band frequencies that modern 4G LTE and 5G networks rely on. As a result, network designers can run multiple services through a single antenna platform instead of installing separate antennas for each band.
A DAS antenna works as part of a distributed coverage system, extending signals through a building with multiple antennas tied back to a central source. Small cell antennas, on the other hand, pair with localized base stations to boost capacity and coverage in specific areas. In practice, most indoor deployments use both — DAS for broad coverage and small cells for targeted capacity.
Omni antennas work best when you need broad 360-degree coverage — think open office spaces, retail floors, or hotel lobbies. Panel antennas, by contrast, are the better choice for directional coverage in corridors, hallways, tunnels, or anywhere you need to focus the signal in a specific direction.
Low Passive Intermodulation (PIM) helps reduce unwanted interference within cellular networks. In high-capacity 4G and 5G deployments, low PIM antennas directly improve signal quality, network performance, and user reliability across the coverage area. That’s why low PIM is a must for serious DAS projects.
The best antenna depends on the installation environment and your coverage goals. For projects where aesthetics and low-profile installation matter, Ultra Slim Omni antennas are a popular pick. Ceiling Omni antennas handle broad indoor coverage well, while Panel antennas excel in corridors and other directional zones. Keep in mind that building layout, network architecture, and user density also play into the final design.
About Airplux Antenna Solutions
Airplux Technologies is a specialized antenna manufacturer integrating antenna design, research and development, production, and sales. We provide reliable antenna solutions covering RFID antennas, WiFi antennas, DAS antennas, IoT antennas, base station antennas, and customized antenna products from 350MHz to 6GHz.
With professional antenna design capabilities and flexible manufacturing experience, Airplux supports customers with both standard antenna products and customized solutions for different project requirements. Our antennas are widely used in various wireless communication and identification systems worldwide, serving system integrators, enterprises, and manufacturers with stable performance and reliable quality.
Please contact us for more detailed info or any inquiry: info@airpluxtec.com
Explore Antenna Solutions
need the right antenna solution？
From standard antenna products to customized designs,Airplux provides professional antenna solutions for
different wireless communication requirements.