4dBi UHF PCB RFID Antenna-230x230mm

UHF PCB RFID Antenna
Model: APRIA9004CX
Frequency Range: 902-928MHz
Polarization: Circular
Gain: 4dBi
Product Descriptions
The APRIA9004CX is a 4dBi circularly polarized UHF RFID PCB antenna designed for the 902–928 MHz band. Built on a 230×230×1mm natural-color PCB, it offers a wide and balanced beamwidth of 74° horizontal and 72° vertical, ensuring broad coverage for diverse RFID deployments. With VSWR ≤1.5, 50Ω impedance, DC grounding lightning protection, and an SMA-Female connector, it supports up to 100W maximum power. Weighing 0.3kg, it is well-suited for warehouse logistics, door control systems, production line management, and other UHF RFID applications.
Descriptions
- 902-928MHz
- 4dBi
- CircularPolarization
- 230*230*1mm
Applications
- RFID logistics tracking
- Warehouse management
- Door control system
- Production line management
Product Specifications
Electrical Specifications
Frequency | 902-928MHz |
Gain | 4dBi |
Beam width | Hor:74° Ver:72° |
Polarization | Circular |
VSWR | ≤1.5 |
Impedance | 50Ω |
Maximum power | 100W |
Lightning protection | DC Ground |
Connector | SMA-Female |
Mechanical Specifications
Antenna dimensions | 230*230*1mm |
Net weight | 0.3kg |
Gross weight | 0.5kg |
Antenna material | PCB |
Antenna color | Natural color |
Operating temperature | -20-60℃ |
Antenna Pattern


H-Plane
E-Plane
Antenna Drawing

Applications

RFID Logistics Tracking

Warehouse Management

Door Control System

Production Line Management
PRODUCT SUPPORT
FAQ - 902–928MHz UHF RFID Antenna
Choosing the right 902–928MHz RFID antenna involves more than checking its frequency range. Consider the following factors:
- Gain: Determines how RF energy is distributed in the antenna’s radiation pattern.
- Beamwidth: Helps define the intended horizontal and vertical coverage.
- Polarization: Circular polarization can accommodate variations in tag orientation, while linear polarization can work well when tag alignment is predictable.
- Installation: Consider the available mounting space, antenna orientation, and surrounding materials.
- Compatibility: Check the reader’s frequency range, impedance, connector interface, and supported RF power.
The best antenna depends on the reading area, tag placement, and operating requirements of the application.
The 902–928MHz band is shared by different types of wireless devices, so interference may occur when multiple systems operate nearby. In RFID installations, nearby readers and other RF sources may affect reading consistency, particularly in environments with several wireless systems.
Interference management usually involves suitable reader configuration, frequency planning, transmit power control, and frequency-hopping techniques where supported by the system. Antenna selection also matters: an appropriate radiation pattern and polarization can help control the intended reading area. Proper impedance matching supports efficient power transfer, but it does not eliminate interference from other devices.
Ultra-thin UHF RFID PCB antennas are useful in applications where installation space and antenna profile are important design considerations. Their flat structure can make them easier to integrate into equipment, workstations, panels, and other structures with limited mounting depth. A 230 × 230 × 1mm antenna provides a relatively large surface area while maintaining a slim profile. Before installation, check the supporting structure, mounting method, and surrounding materials to ensure suitable RF performance.
RFID antennas can be installed at selected production stages to identify tagged components, work-in-process items, and finished products. As items pass through designated reading points, the antenna communicates with their tags through an RFID reader. The collected data can then be used by manufacturing software to record product movement and support production visibility. Antenna placement should be planned around the workflow, tag position, and movement speed to help maintain consistent identification.
RFID supports logistics tracking by identifying tagged goods during receiving, sorting, storage, and dispatch. Antennas installed at handling points or checkpoints communicate with tags, allowing readers to capture item information without requiring each tag to be manually scanned. When connected to logistics management software, the system can help record goods movement and improve inventory visibility. The antenna arrangement should match the checkpoint layout, package presentation, and required reading area.
Circular polarization can help accommodate changes in tag orientation because it is less dependent on a single alignment direction than linear polarization. This can be useful in production and logistics applications where tagged items may be presented at different angles. However, circular polarization does not guarantee successful reading at every orientation. Tag design, antenna placement, reading distance, reader settings, and surrounding materials still influence system performance.
Please feel free to contact us by info@airpluxtec.com for more detailed info if you’re interested in this Antenna, or please check here for our more UHF PCB RFID Antenna products, or here for more RFID Products.
Contact
We are always ready to serve you.
Please feel free to contact us
for any antenna inquiry or requirement.
Leave us a message in the form below and
we will get back to you within 24 hours.