3dBi UHF PCB RFID Antenna - 180x162mm

UHF PCB RFID Antenna

Model: APRIA9003CX-180

Frequency Range: 902-928MHz

Polarization: Circular 

Gain: 3dBi

Product Descriptions

The APRIA9003CX-180 is a 3dBi circularly polarized UHF RFID PCB antenna operating in the 902–928 MHz frequency band. Its 180×162×1mm natural-color PCB construction delivers a balanced beamwidth of 73° horizontal and 64° vertical, with stable VSWR ≤1.5 and a front-to-back ratio ≥10. Featuring DC grounding lightning protection, 50Ω impedance, and an SMA-Female connector, it handles up to 100W of maximum power. Weighing just 0.2kg, this antenna is ideal for RFID logistics tracking, warehouse management, access control systems, and production line applications.

Descriptions

  • 902-928MHz
  • 3dBi
  • CircularPolarization
  • 180*162*1mm

Applications

  • RFID logistics tracking
  • Warehouse management
  • Door control system
  • Production line management

Product Specifications

Electrical Specifications

Frequency

902-928MHz

Gain

3dBi

Beam width

Hor:73°  Ver:64°

Polarization

Circular

VSWR

≤1.5

F/B Ratio

≥10

Impedance

50Ω

Maximum power

100W

Lightning protection

DC Ground

Connector

SMA-Female

 

Mechanical Specifications

Antenna dimensions

180*162*1 mm

Net weight

0.2kg

Gross weight

0.4kg

Antenna material

PCB

Antenna color

Natural color

Operating temperature

-20-60℃

 

Antenna Pattern

3dBi UHF PCB RFID Antenna – 180x162mm - Antenna Pattern H
3dBi UHF PCB RFID Antenna – 180x162mm - Antenna Pattern V

H-Plane

E-Plane

Antenna Drawing

3dBi UHF PCB RFID Antenna - 180x162mm

Applications

Supply Chain Management

RFID Logistics Tracking

RFID Antenna Warehouse Management

Warehouse Management

door control

Door Control System

product line

Production Line Management

PRODUCT SUPPORT

FAQ - 902–928MHz UHF RFID Antenna

Choosing the right 902–928MHz RFID antenna involves more than checking its frequency range. Consider the following factors:​

  • Gain: Determines how RF energy is distributed in the antenna’s radiation pattern.​
  • Beamwidth: Helps define the intended horizontal and vertical coverage.​
  • Polarization: Circular polarization can accommodate variations in tag orientation, while linear polarization can work well when tag alignment is predictable.​
  • Installation: Consider the available mounting space, antenna orientation, and surrounding materials.​
  • Compatibility: Check the reader’s frequency range, impedance, connector interface, and supported RF power.​

The best antenna depends on the reading area, tag placement, and operating requirements of the application.​

The 902–928MHz band is shared by different types of wireless devices, so interference may occur when multiple systems operate nearby. In RFID installations, nearby readers and other RF sources may affect reading consistency, particularly in environments with several wireless systems.​

Interference management usually involves suitable reader configuration, frequency planning, transmit power control, and frequency-hopping techniques where supported by the system. Antenna selection also matters: an appropriate radiation pattern and polarization can help control the intended reading area. Proper impedance matching supports efficient power transfer, but it does not eliminate interference from other devices.​

When integrating a PCB RFID antenna into equipment, consider the available mounting area, antenna dimensions, cable routing, and the position of nearby materials. A thin antenna can be useful when the design has limited mounting depth or requires a discreet installation. For example, a 180 × 162 × 1mm PCB antenna may suit equipment with a relatively compact mounting area. The final installation should be tested because the enclosure and surrounding components can affect RF performance.

RFID can identify tagged items as they pass through designated warehouse checkpoints, such as receiving, sorting, storage, and dispatch areas. An antenna communicates with the tags through an RFID reader, allowing item information to be collected and transferred to warehouse management software. This can help record goods movement and improve inventory visibility. The reading setup should be planned around the checkpoint layout, tag position, item movement, and required identification area.

RFID can help track components and work-in-process items as they move between production workstations. Tags attached to products or containers can be detected at selected reading points, allowing the system to record their movement through different manufacturing stages. This information can support production monitoring, work-in-process visibility, and inventory updates. Antenna placement should correspond to the actual workflow and tag presentation position to help achieve reliable identification.

Yes. UHF RFID antennas can be incorporated into access control equipment designed to identify compatible UHF tags or credentials. When a tagged item enters the intended reading area, the antenna communicates with the tag through the reader, and the access control system processes the identification data. The antenna and reader must match the credential type and operating frequency. Testing with the actual enclosure and tags is important to verify the reading area and system response.

Please feel free to contact us by info@airpluxtec.com for more detailed info if you’re interested in this Antenna, or please check here for our more UHF PCB RFID Antenna products, or here for more RFID Products.

Contact

We are always ready to serve you.

Please feel free to contact us
for any antenna inquiry or requirement.

Leave us a message in the form below and
we will get back to you within 24 hours.