12dBi UHF RFID ANTENNA

12dBi UHF RFID Antenna

Model: APRIA90012H

Frequency Range: 902-928MHz

Polarization: Horizontal 

Gain: 12dBi

 

 

Product Descriptions

The APRIA90012H 12dBi UHF RFID Antenna is a high gain, horizontal polarized, flat panel antenna. With narrow beam width of 40deg, it can read for a long range. The antenna can be used in Horizontal or vertical polarization. Engineering ABS plastic housing, rugged construction and high protection level makes the antenna good for any type of outdoor installation. The antenna size is 440x440x95mm, comes with an integral N-Female connector and includes the heavy duty pole mount bracket which allows up or down tilt adjustment.

The antenna is suitable for high performance RFID applications. For example, assets tracking, warehouse management, intelligent traffic management, vehicle tracking, production line management, intelligent weight measurement etc.

This model is FCC UHF RFID frequencies for 902-928MHz, there is also another model of ETSI UHF RFID frequencies for 865-868MHz.

Product Photos

12dBi UHF RFID Antenna - UHF RAIN RFID Antenna
12dBi UHF RFID Antenna - UHF RAIN RFID Antenna
12dBi UHF RFID Antenna - UHF RAIN RFID Antenna

Product Specifications - 12dBi UHF RFID Antenna

Electrical Specifications

Frequency

902-928MHz

Gain

12dBi

Beam width

Hor:40°  Ver:40°

Polarization

Horizontal

VSWR

≤1.5

F/B Ratio

≥25

Impedance

50Ω

Maximum power

100W

Lightning protection

DC Ground

Connector

Customized

Mechanical Specifications

Dimension

440*440*95mm

Net weight

2.8kg

Packing size

60*48*12cm

Gross weight

4.9kg

Radome material

ABS

Radome colour

White

Pole Diameter

Φ40-80mm

Rated wind velocity

60m/s

Operating temperature

-40-70℃

PRODUCT SUPPORT

FAQ - 902–928MHz UHF RFID Antenna

Not necessarily. A higher-gain UHF RFID antenna generally concentrates more RF energy in certain directions, which may help extend the reading distance in a suitably designed system. However, gain alone does not determine actual performance. Beamwidth, antenna orientation, reader power, tag characteristics, cable loss, and environmental conditions all influence the effective reading range. The best antenna should be selected according to the required reading area rather than gain alone.

The choice between linear and circular polarization depends mainly on how RFID tags are positioned during identification. A linearly polarized antenna works best when its polarization direction is aligned with the tag antenna, making it suitable for applications where tag orientation is controlled. A circularly polarized antenna offers greater flexibility when tags may be presented at different angles. However, neither polarization guarantees successful reading in every orientation. The application, tag placement, and required reading area should all be considered when selecting an antenna.

High-gain UHF RFID antennas can be used at designated identification points to read tags attached to vehicles, containers, equipment, and other assets. By concentrating RF energy in specific directions, they can support applications that require identification across a defined reading area. Actual reading distance depends on reader output power, tag sensitivity, cable loss, tag orientation, and the surrounding environment.

Horizontal linear polarization can work well in vehicle identification systems when the RFID tags are mounted with a compatible orientation. For example, if tags are consistently installed in a fixed position on vehicles, matching the antenna’s polarization with the tag can help maintain more consistent reading performance. Tag placement and antenna alignment should be checked during installation, especially when vehicles carry tags in different positions.

An adjustable pole-mount bracket allows the antenna’s tilt angle to be changed to suit different installation layouts. This is useful for directing the reading area toward vehicle lanes, warehouse access points, or outdoor asset identification zones. Proper adjustment can help align the antenna with target tags and reduce unwanted reads outside the intended area. The pole and bracket must also provide sufficient mechanical support for the antenna.

Directional RFID antennas can be installed near vehicle entrances and exits to identify tagged vehicles within designated access zones. By directing the antenna toward the intended lane, the system can help control where RFID tags are detected and support automated entry records, parking management, and vehicle access authorization. The final reading zone should be tested under actual traffic conditions to reduce interference from nearby vehicles or tags.

Please feel free to contact us by info@airpluxtec.com for more detailed info if you’re interested in this Antenna, or please check here for our more RFID Antenna products, or here for more RFID Products.

Contact

We are always ready to serve you.

Please feel free to contact us
for any antenna inquiry or requirement.

Leave us a message in the form below and
we will get back to you within 24 hours.