12dBi Linear Polarized RFID Antenna

Linear Polarized RFID Antenna

Model: APRIA90012HA

Frequency Range: 902-928MHz

Polarization: Horizontal

Gain: 12dBi

Product Descriptions

The APRIA90012HA is a high-gain RFID antenna featuring horizontal polarization and a narrow, focused radiation pattern. Its front-to-back ratio of at least 25 dB helps concentrate radiation toward the intended coverage area. The ABS radome and pole-mount design make it suitable for fixed outdoor RFID installations in logistics, warehouse management, door control, and parking management systems.

Descriptions

  • 902-928MHz
  • 12dBi
  • Horizontal Polarization
  • 445*445*42mm

Applications

  • RFID logistics tracking
  • Warehouse management
  • Door control system
  • Parking lot management

Product Specifications

Electrical Specifications

Frequency

902-928MHz

Gain

12dBi

Beam width

Hor:40°  Ver:40°

Polarization

Horizontal

VSWR

≤1.3

F/B Ratio

≥25

Impedance

50Ω

Maximum power

100W

Lightning protection

DC Ground

Connector

N-Female

Mechanical Specifications

Antenna dimensions

445*445*42mm

Net weight

2.1kg

Packing size

60*48*11cm

Gross weight

3.92kg

Radome material

ABS

Radome color

White

Pole diameter

Φ40-80mm

Rated wind velocity

50m/s

Operating temperature

-20-60℃

IP Rating

IP64

Product Photots

12dBi UHF RFID Antenna - UHF RAIN RFID Antenna
12dBi UHF RFID Antenna - UHF RAIN RFID Antenna
12dBi UHF RFID Antenna - UHF RAIN RFID Antenna

Antenna Drawing

12dBi Linear Polarized UHF RFID Antenna

Applications

Supply Chain Management

RFID Logistics Tracking

RFID Antenna Warehouse Management

Warehouse Management

door control

Door Control System

parking management

Parking Management

PRODUCT SUPPORT

FAQ - 902–928MHz UHF RFID Antenna

Choosing the right 902–928MHz RFID antenna involves more than checking its frequency range. Consider the following factors:​

  • Gain: Determines how RF energy is distributed in the antenna’s radiation pattern.​
  • Beamwidth: Helps define the intended horizontal and vertical coverage.​
  • Polarization: Circular polarization can accommodate variations in tag orientation, while linear polarization can work well when tag alignment is predictable.​
  • Installation: Consider the available mounting space, antenna orientation, and surrounding materials.​
  • Compatibility: Check the reader’s frequency range, impedance, connector interface, and supported RF power.​

The best antenna depends on the reading area, tag placement, and operating requirements of the application.​

The 902–928MHz band is shared by different types of wireless devices, so interference may occur when multiple systems operate nearby. In RFID installations, nearby readers and other RF sources may affect reading consistency, particularly in environments with several wireless systems.​

Interference management usually involves suitable reader configuration, frequency planning, transmit power control, and frequency-hopping techniques where supported by the system. Antenna selection also matters: an appropriate radiation pattern and polarization can help control the intended reading area. Proper impedance matching supports efficient power transfer, but it does not eliminate interference from other devices.​

RFID antennas can be integrated into parking management systems to identify vehicles carrying compatible RFID tags. Installed near entry or exit lanes, they communicate with vehicle tags and send identification data to the reader for access control and parking record management. Antenna positioning, tag mounting location, vehicle speed, and lane layout all influence reading consistency. The complete system should be tested under actual parking conditions before deployment.

Outdoor RFID access control installations require attention to antenna positioning, mounting stability, environmental protection, and tag orientation. The antenna should be aligned with the intended reading area, while nearby metal structures and other RF equipment should be considered during installation. The reader, cable, connector, and tags must also be compatible. For pole-mounted installations, the mounting structure should be checked against the antenna’s weight and expected wind conditions.

A horizontally polarized UHF RFID antenna works best when the tag’s polarization direction is aligned with the antenna’s horizontal polarization. If the tag is positioned at a different angle, signal reception may weaken and reading consistency may decrease. This is particularly important in fixed installations where tags are attached to goods, vehicles, or equipment in different orientations. Antenna and tag placement should be evaluated together during system design and verified through practical testing.

The front-to-back ratio describes the difference between radiation in an antenna’s forward direction and its backward direction. A higher ratio indicates less radiation toward the rear relative to the main forward direction. This characteristic can help when planning an RFID reading area near walls, equipment, or other adjacent spaces. However, it does not guarantee that tags outside the intended area will not be detected, as reflections and the surrounding RF environment can still affect actual reading results.

Contact

We are always ready to serve you.

Please feel free to contact us
for any antenna inquiry or requirement.

Leave us a message in the form below and
we will get back to you within 24 hours.

Please feel free to contact us by info@airpluxtec.com for more detailed info if you’re interested in this Antenna, or please check here for our more Linear Polarized RFID Antenna products, or here for more RFID Products.