12dBi Linear Polarized Outdoor UHF RFID Antenna

Outdoor UHF RFID Antenna

Model: APRIA90012VB

Frequency Range: 902-928MHz

Polarization: Vertical 

Gain: 12dBi

Product Descriptions

The APRIA90012VB UHF RFID Antenna is a high performance, high quality Linear Polarized  Outdoor antenna, with 12dBi gain and very low VSWR. Antenna working frequency range is FCC 902-928MHz , also available for ETSI 865-868MHz version. Standard with N-Female connector,  available of any type of customized antenna connector & cable length based on the actual usage requirements and applications. 

This UHF RFID Antenna will be good for the applications of RFID logistics tracking, Warehouse management, Door control system, Man management system and so on.

Descriptions

  • 902-928MHz
  • 12dBi
  • Vertical  Polarization
  • 500*240*55mm

Applications

  • RFID logistics tracking
  • Warehouse management
  • Door control system
  • Parking lot management

Product Specifications

Electrical Specifications

Frequency

902-928MHz

Gain

12dBi

Beam width

Hor:60°  Ver:35°

Polarization

Vertical

VSWR

≤1.3

F/B Ratio

≥20

Lightning protection

DC Ground

Impedance

50Ω

Maximum power

100W

Connector

N-Female

 

Mechanical Specifications

Antenna Dimensions

500*240*55mm

Net weight

1.46kg

Radome material

ABS

Radome color

White

Operating temperature

-20-60℃

IP Rating

IP65

 

Product Photos

12dBi Linear Polarized Outdoor UHF RFID Antenna
12dBi Linear Polarized High Gain UHF RFID Antenna
12dBi Linear Polarized High Gain UHF RFID Antenna

Antenna Pattern

12dBi Linear Polarized Outdoor UHF RFID Antenna - E

H-Plane

E-Plane

Applications

Supply Chain Management

RFID Logistics Tracking

RFID Antenna Warehouse Management

Warehouse Management

door control

Door Control System

parking management

Parking Management

PRODUCT SUPPORT

FAQ - 902–928MHz UHF RFID Antenna

Choosing the right 902–928MHz RFID antenna involves more than checking its frequency range. Consider the following factors:​

  • Gain: Determines how RF energy is distributed in the antenna’s radiation pattern.​
  • Beamwidth: Helps define the intended horizontal and vertical coverage.​
  • Polarization: Circular polarization can accommodate variations in tag orientation, while linear polarization can work well when tag alignment is predictable.​
  • Installation: Consider the available mounting space, antenna orientation, and surrounding materials.​
  • Compatibility: Check the reader’s frequency range, impedance, connector interface, and supported RF power.​

The best antenna depends on the reading area, tag placement, and operating requirements of the application.​

The 902–928MHz band is shared by different types of wireless devices, so interference may occur when multiple systems operate nearby. In RFID installations, nearby readers and other RF sources may affect reading consistency, particularly in environments with several wireless systems.​

Interference management usually involves suitable reader configuration, frequency planning, transmit power control, and frequency-hopping techniques where supported by the system. Antenna selection also matters: an appropriate radiation pattern and polarization can help control the intended reading area. Proper impedance matching supports efficient power transfer, but it does not eliminate interference from other devices.​

A high-gain UHF RFID antenna concentrates more RF energy toward its main radiation direction, which can help support identification over a larger distance under suitable conditions. A 12dBi antenna may be considered for applications such as outdoor logistics checkpoints, warehouse access points, and vehicle identification areas. However, gain alone does not determine the actual reading distance. Reader output power, tag sensitivity, antenna height, installation angle, and the surrounding environment all influence system performance.

RFID can support vehicle identification at parking entrances and exits by using tags attached to or associated with vehicles. An antenna communicates with compatible tags as vehicles approach a designated reading point, while the reader sends the collected information to the parking management or access control system. For reliable operation, the antenna should be positioned according to the vehicle approach direction and tag location. Vehicle speed, tag placement, nearby metal structures, and reader configuration should also be considered during testing.

Vertical polarization refers to the orientation of the electric field in a linearly polarized antenna. A vertically polarized RFID antenna generally performs best when the tag antenna has a compatible polarization direction. If the tag orientation differs, reading performance may decrease depending on the angle and installation conditions. This makes vertical linear polarization worth considering when tagged items or vehicles present a relatively consistent tag orientation within the reading area.

An IP65 rating indicates that an enclosure is dust-tight and protected against water jets from a nozzle. This makes an IP65-rated antenna suitable for consideration in many outdoor installations exposed to dust and rain. However, IP65 does not mean that the antenna can be submerged in water or exposed to continuous flooding. Proper mounting, cable sealing, connector protection, and installation practices are still necessary to maintain environmental protection.

Please feel free to contact us by info@airpluxtec.com for more detailed info if you’re interested in this Antenna, or please check here for our more High Gain Outdoor UHF RFID Antenna products, or here for more RFID Products.

Contact

We are always ready to serve you.

Please feel free to contact us
for any antenna inquiry or requirement.

Leave us a message in the form below and
we will get back to you within 24 hours.