UHF RFID Railway Antenna

UHF RFID Railway Antenna

Model: APRIA90010LG

Frequency Range: 902-928MHz

Polarization: Linear

Gain: 10dBi

Product Descriptions

The APRIA90010LG is a robust 902–928 MHz UHF RFID antenna offering 10 dBi gain and linear polarization in a 605 × 155 × 56 mm fiberglass housing. It provides a horizontal beamwidth of 100° and a vertical beamwidth of 30°, with a low VSWR of ≤1.3 for efficient signal transmission. With IP65 protection and DC ground lightning protection, it is well suited for railway management, vehicle management, intelligent traffic monitoring systems, and RFID logistics tracking.

Descriptions

  • 902-928MHz
  • 10dBi
  • Linear Polarization
  • 605*155*56mm

Applications

  • Railway adminitraion
  • Parking management
  • Intelligent transportation system
  • RFID logistic tracking

Product Specifications

Electrical Specifications

Frequency

902-928MHz

Gain

10dBi

Beam width

Hor:100°  Ver:30°

Polarization

Linear

VSWR

≤1.3

F/B Ratio

≥12

Impedance

50Ω

Maximum power

100 W

Lightning protection

DC Ground

Connector

SMA-Female

 

Mechanical Specifications

Antenna dimensions

605×155×56 mm

Net weight

2.46KG

Packing size

63*17*10cm

Gross weight

2.72KG

Antenna radome material

Fiberglass

Antenna color

Black

Operating temperature

-20-60℃

IP Rating

IP65

 

Product Photos

Railway UHF RFID Antenna - UHF RAIN RFID Antenna - 1
Railway UHF RFID Antenna - UHF RAIN RFID Antenna - 2
Railway UHF RFID Antenna - UHF RAIN RFID Antenna - 3

Applications

Railway adminitraion

Railway Adminitraion

parking management

Parking Management

Intelligent Transportation

Intelligent Transportation

Supply Chain Management

RFID Logistics Tracking

PRODUCT SUPPORT

FAQ - 902–928MHz UHF RFID Antenna

Choosing the right 902–928MHz RFID antenna involves more than checking its frequency range. Consider the following factors:​

  • Gain: Determines how RF energy is distributed in the antenna’s radiation pattern.​
  • Beamwidth: Helps define the intended horizontal and vertical coverage.​
  • Polarization: Circular polarization can accommodate variations in tag orientation, while linear polarization can work well when tag alignment is predictable.​
  • Installation: Consider the available mounting space, antenna orientation, and surrounding materials.​
  • Compatibility: Check the reader’s frequency range, impedance, connector interface, and supported RF power.​

The best antenna depends on the reading area, tag placement, and operating requirements of the application.​

The 902–928MHz band is shared by different types of wireless devices, so interference may occur when multiple systems operate nearby. In RFID installations, nearby readers and other RF sources may affect reading consistency, particularly in environments with several wireless systems.​

Interference management usually involves suitable reader configuration, frequency planning, transmit power control, and frequency-hopping techniques where supported by the system. Antenna selection also matters: an appropriate radiation pattern and polarization can help control the intended reading area. Proper impedance matching supports efficient power transfer, but it does not eliminate interference from other devices.​

RFID antennas provide wireless identification at selected points in transportation networks. They can help identify vehicles, monitor the movement of tagged assets, and collect traffic-related data at checkpoints. When connected to RFID readers and transportation management software, the collected information can support vehicle tracking, logistics coordination, and traffic monitoring. RFID is generally used as part of a wider transportation system rather than as a standalone traffic monitoring solution.

Railway installations require careful consideration of antenna positioning, mounting stability, environmental exposure, and tag orientation. Metal structures and nearby equipment may affect RF propagation, so the antenna should be positioned and tested under actual installation conditions. The selected reader, cable, connector, and RFID tags must also be compatible with the antenna system. For outdoor installations, the required protection level and the mechanical stability of the mounting structure should be checked.

An IP65-rated RFID antenna is protected against dust ingress and water jets from any direction, making it suitable for many outdoor environments where exposure to rain, dust, and water spray is expected. However, IP65 does not mean the antenna can be submerged in water or exposed to continuous immersion. Installation conditions, cable connections, mounting points, and long-term environmental exposure should also be considered when deploying the antenna outdoors.

A linear-polarized RFID antenna works best when the antenna’s polarization direction is aligned with the polarization of the RFID tag. In vehicle identification applications, tag orientation and mounting position can affect reading consistency, especially when vehicles pass through a reading point at different angles. The antenna and tag should therefore be positioned with their polarization directions in mind, followed by testing under actual operating conditions.

Please feel free to contact us by info@airpluxtec.com for more detailed info if you’re interested in this Antenna, or please check here for our more UHF RFID Railway Antenna products, or here for more RFID Products.

Contact

We are always ready to serve you.

Please feel free to contact us
for any antenna inquiry or requirement.

Leave us a message in the form below and
we will get back to you within 24 hours.