8dBi UHF RFID Smart Cabinet Patch Antenna

An 865–868 MHz antenna is designed for UHF RFID and low-power wireless applications operating in the European ETSI SRD band. Typical uses include UHF RFID readers (EPC Gen2 / ISO 18000-6C), asset tracking, warehouse management, access control, smart retail, race timing, and IoT/M2M systems deployed in Europe and other regions following ETSI regulations.
Airplux offers this band across multiple product families: the ETSI 865–868 MHz RFID antenna line (3–15 dBi PCB, panel and mat antennas), near-field RFID antennas, narrow-beam antennas, and ETSI UHF integrated reader antennas. For example, the 3 dBi circular-polarized PCB antenna APRIA8003CM-137 suits compact desktop readers, while high-gain panel models support long-range portal and gate applications.

ETSI 865–868 MHz antennas are tuned for the European UHF RFID band (ETSI EN 302 208), while FCC 902–928 MHz antennas cover the North American band (FCC Part 15). The two bands do not overlap, so an antenna optimized for one will have degraded VSWR, gain and read range on the other. Choose the version that matches your reader’s regional profile.
Airplux manufactures both variants with matching mechanical designs — e.g., the ETSI 865–868 MHz panel series and the FCC 902–928 MHz series are available at the same gain levels (3–15 dBi). For global or multi-region deployments that need one SKU for both markets, the wideband UHF 860–960 MHz antenna line covers both bands in a single antenna, ideal for asset tracking and smart retail projects shipped worldwide.

It is not recommended. A 915 MHz antenna is resonant around 902–928 MHz; at 865–868 MHz its impedance match detunes, VSWR rises, and radiated efficiency drops — typically reducing RFID read range by 20–40% or more, and in some regions pushing the system out of regulatory compliance. Always match the antenna to the device’s operating band.
If your hardware must serve both Europe (865–868 MHz) and North America (902–928 MHz), use a genuinely wideband model instead of compromising with a single-band antenna. Airplux’s UHF 860–960 MHz RFID antenna series maintains consistent gain and low VSWR across the entire 860–960 MHz range, so one antenna design can be certified and deployed in both regions.

An IP65 rating means the antenna enclosure is dust-tight and protected against water jets under specified test conditions. The APRIA8008CF uses an ABS radome with an IP65 rating, making it suitable for certain indoor and semi-outdoor installations, including exposed access-control or parking areas. However, IP65 does not mean the antenna can be immersed in water. Cable connections, mounting points, and the complete installation also need appropriate environmental protection.

SMA-Male and SMA-Female describe the connector interfaces used to connect an antenna to an RF cable or reader system. They are not interchangeable without considering the connector on the other end of the connection. The APRIA8008CF uses an SMA-Male connector, so check the reader cable or adapter interface before installation. Also confirm that the cable assembly is suitable for the 865–868 MHz operating band.

The installation space should accommodate the antenna body, mounting hardware, cable connection, and any clearance required by the surrounding structure. The APRIA8008CF measures 220 × 220 × 24 mm and weighs approximately 0.7 kg. Its compact panel format and hanging installation method can suit locations where a smaller antenna assembly is preferred. Before mounting, check the supporting structure and consider the effect of nearby metal surfaces on RF performance.