1710-2690MHz 20dBi 4 Ports Dual-beam Antenna
1710-2690MHz 20dBi 4 Ports Dual-beam Antenna
Model: APDBA1726204P
Frequency Range: 1710-2690MHz
Gain: 20dBi
PIM: ≤-150dBc@2x43dBm
Product Specifications
Electrical Specifications
Frequency Range(MHz) | 1710~2170 | 2170~2300 | 2300~2690 | |||
Model | Y1 | Y2 | Y1 | Y2 | Y1 | Y2 |
Gain(dBi) | 19.0 | 19.0 | 19.5 | 19.5 | 20.0 | 20.0 |
Horizontal 3dB Beamwidth(°) | 30 | 30 | 27 | 27 | 24 | 24 |
Horizontal Beam pointing(°) | 29 | -29 | 26 | -26 | 23 | -23 |
Vertical 3dB Beamwidth(°) | 7.5 | 7.5 | 6.7 | 6.7 | 6.0 | 6.0 |
Model | Y1,Y2 |
Frequency Range(MHz) | 1710~2690 |
Polarization | ±45° |
VSWR | <1.5 |
Isolation between polarizations(dB) | ≤-28 |
Isolation between sub-antenna ports(dB) | ≤-15 |
Vertical First Upper Sidelobe Suppression(dB) | ≤-16 |
Horizontal Sidelobe Suppression(dB) | ≤-15 |
Front to Back Ratio@180±30°(dB) | ≥25 |
Cross-Polar Discrimination at Boresight (dB) | ≥15 |
Electrical Downtilt(°) | 2~12 |
Intermodulation IM3(dBc) | ≤-150(2*43dBm) |
Power Rating(W) | 250 |
Impedance(ohm) | 50 |
Lightning protection | DC Ground |
RET | 2×Internal Independent and removable RCU |
Mechanical Specifications
Mechanical Specifications | |
Connector(s) | 4×4.3-10 Female |
Radome Material | Fiberglass |
Antenna Dimensions H×W×D(mm) | 1385×350×155 |
Packing Dimensions H×W×D(mm) | 1550×450×295 |
Antenna Weight(kg) | 18 |
Clamp Weight(kg) | 5.7(2 units) |
Mechanical Tilt(°) | 0~10 |
Diameter of Installation Pole(mm) | Φ50~114 |
Pole Length(mm) | ≥1400 |
Operating Temperature Range(°C) | -40~+65 |
Wind Load (at 150km/h)(N) | 631/349/789(Frontal/Lateral/Rear side) |
Maximum Wind Speed(km/h) | 200 |
Horizontal
Vertical
Please feel free to contact us by info@airpluxtec.com for more detailed info if you’re interested in this Antenna, or please check here for our more Dual-beam Antenna – Multibeam antenna products.